NASA plans to send crewed missions to Mars over the following decade – however the 140 million-mile (225 million-kilometer) journey to the pink planet could take several months to years round trip.
This comparatively lengthy transit time is a results of using conventional chemical rocket gas. Another expertise to the chemically propelled rockets the company develops now is known as nuclear thermal propulsion, which makes use of nuclear fission and will one day power a rocket that makes the journey in simply half the time.
Nuclear fission entails harvesting the unimaginable quantity of vitality launched when an atom is break up by a neutron. This reaction is known as a fission reaction. Fission expertise is nicely established in energy technology and nuclear-powered submarines, and its utility to drive or energy a rocket might sooner or later give NASA a quicker, extra highly effective different to chemically pushed rockets.
NASA and the Protection Superior Analysis Tasks Company are jointly developing NTP technology. They plan to deploy and show the capabilities of a prototype system in area in 2027 – doubtlessly making it one of many first of its type to be constructed and operated by the U.S.
Nuclear thermal propulsion might additionally sooner or later energy maneuverable space platforms that may shield American satellites in and past Earth’s orbit. However the expertise remains to be in improvement.
I’m an associate professor of nuclear engineering at the Georgia Institute of Technology whose research group builds fashions and simulations to enhance and optimize designs for nuclear thermal propulsion techniques. My hope and keenness is to help in designing the nuclear thermal propulsion engine that may take a crewed mission to Mars.
Nuclear versus chemical propulsion
Typical chemical propulsion techniques use a chemical response involving a light-weight propellant, corresponding to hydrogen, and an oxidizer. When combined collectively, these two ignite, which ends up in propellant exiting the nozzle in a short time to propel the rocket.
These techniques don’t require any type of ignition system, in order that they’re dependable. However these rockets should carry oxygen with them into area, which might weigh them down. In contrast to chemical propulsion techniques, nuclear thermal propulsion techniques depend on nuclear fission reactions to warmth the propellant that’s then expelled from the nozzle to create the driving power or thrust.
In lots of fission reactions, researchers ship a neutron towards a lighter isotope of uranium, uranium-235. The uranium absorbs the neutron, creating uranium-236. The uranium-236 then splits into two fragments – the fission merchandise – and the response emits some assorted particles.
Greater than 400 nuclear energy reactors in operation around the world at the moment use nuclear fission expertise. The vast majority of these nuclear energy reactors in operation are light water reactors. These fission reactors use water to decelerate the neutrons and to soak up and switch warmth. The water can create steam instantly within the core or in a steam generator, which drives a turbine to supply electrical energy.
Nuclear thermal propulsion systems function in an analogous approach, however they use a distinct nuclear gas that has extra uranium-235. In addition they function at a a lot increased temperature, which makes them extraordinarily highly effective and compact. Nuclear thermal propulsion techniques have about 10 occasions extra energy density than a standard mild water reactor.
Nuclear propulsion might have a leg up on chemical propulsion for a few reasons.
Nuclear propulsion would expel propellant from the engine’s nozzle in a short time, producing high thrust. This excessive thrust permits the rocket to speed up quicker.
These techniques even have a excessive particular impulse. Specific impulse measures how effectively the propellant is used to generate thrust. Nuclear thermal propulsion techniques have roughly twice the precise impulse of chemical rockets, which implies they may lower the journey time by an element of two.
Nuclear thermal propulsion historical past
For many years, the U.S. authorities has funded the event of nuclear thermal propulsion expertise. Between 1955 and 1973, packages at NASA, General Electric and Argonne National Laboratories produced and ground-tested 20 nuclear thermal propulsion engines.
However these pre-1973 designs relied on extremely enriched uranium gas. This gas is now not used due to its proliferation dangers, or risks that need to do with the unfold of nuclear materials and expertise.
The Global Threat Reduction Initiative, launched by the Division of Vitality and National Nuclear Security Administration, goals to transform lots of the analysis reactors using extremely enriched uranium gas to high-assay, low-enriched uranium, or HALEU, gas.
Excessive-assay, low- enriched uranium gas has much less materials able to present process a fission response, in contrast with extremely enriched uranium gas. So, the rockets must have extra HALEU gas loaded on, which makes the engine heavier. To unravel this concern, researchers are wanting into particular supplies that may use gas extra effectively in these reactors.
NASA and the DARPA’s Demonstration Rocket for Agile Cislunar Operations, or DRACO, program intends to make use of this high-assay, low-enriched uranium gas in its nuclear thermal propulsion engine. This system plans to launch its rocket in 2027.
As a part of the DRACO program, the aerospace firm Lockheed Martin has partnered with BWX Applied sciences to develop the reactor and fuel designs.
The nuclear thermal propulsion engines in improvement by these teams might want to adjust to particular efficiency and security requirements. They’ll have to have a core that may function at some point of the mission and carry out the required maneuvers for a quick journey to Mars.
Ideally, the engine ought to be capable to produce excessive particular impulse, whereas additionally satisfying the excessive thrust and low engine mass necessities.
Ongoing analysis
Earlier than engineers can design an engine that satisfies all these requirements, they should begin with fashions and simulations. These fashions assist researchers, corresponding to these in my group, perceive how the engine would deal with beginning up and shutting down. These are operations that require fast, large temperature and strain adjustments.
The nuclear thermal propulsion engine will differ from all current fission energy techniques, so engineers might want to construct software program instruments that work with this new engine.
My group designs and analyzes nuclear thermal propulsion reactors utilizing fashions. We mannequin these complicated reactor techniques to see how issues corresponding to temperature adjustments could have an effect on the reactor and the rocket’s security. However simulating these results can take a whole lot of costly computing energy.
We’ve been working to develop new computational tools that mannequin how these reactors act whereas they’re starting up and operated with out utilizing as a lot computing energy.
My colleagues and I hope this analysis can sooner or later assist develop fashions that might autonomously management the rocket.
Dan Kotlyar is an affiliate professor of nuclear and radiological engineering at Georgia Institute of Technology.
This text is republished from The Conversation underneath a Inventive Commons license. Learn the original article.